OBD Power Module — 24/7 Parking Mode
OBD Power Module — 24/7 Parking Mode
24/7 parking mode — the camera keeps recording while the car is off
Plugs into the OBD port — plug & play, no touching the fuse panel
2-minute install — no tools, no mechanic
Battery protection — cuts off automatically at low voltage
USB-C connector — compatible with MaxDriver Vision 4K
Standard OBD port — found in the vast majority of cars built after 2004
Ships within 24h on business days
Ships in 24hWarranty
12 months
Returns
30 days
Secure checkout
Apple Pay · PayPal · cards
What's in the box
USB-C OBD power module, with an 11.5 ft (3.5 m) cable
Tech specs
Input: DC 12V / 24V
Output: DC 5V / 2.5A
Connector: USB-C
Cable length: 11.5 ft / 3.5 m (total)
Low-voltage cutoff: 11.6V (12V) / 23.6V (24V)
Thermal protection: cuts off above 266°F (130°C)
Parking-mode switch: starts monitoring after 3 / 5 / 10 min
Compatibility: dash cams with a USB-C port
Parcare 24/7
Your parking guard, no electrician needed
Plug it into the OBD port under the steering wheel and the camera gets permanent power. Your car stays watched all night — and if someone hits it in the parking lot, you have the footage. No cutting cables, no mechanic.
How does it work?
Find the OBD port
It's under the steering wheel, within reach — the same port your mechanic uses for diagnostics.
Plug in the module
Plug it into the port and run the cable to the camera. Two minutes, no tools.
The camera watches 24/7
From that moment, every night in the parking lot is covered. Review the footage in the app.
The OBD module plugs into the diagnostics port and enables 24/7 monitoring even with the engine off. ⚡ 12V socket stays free • 🔋 Battery protection • 🛡️ 24/7 surveillance
Frequently asked questions
What is the OBD port and where do I find it?
It's the car's standard diagnostics port, usually under the steering wheel. Nearly all petrol and diesel cars built after 2004 have one. Exception: full-electric cars and some plug-in hybrids — there we recommend the hardwire kit instead.
Will it drain my battery?
The module monitors voltage and cuts off automatically when the battery runs low — your car starts fine in the morning.
Merge cu camera mea MaxDriver?
Yes — it has a USB-C connector and is designed for the MaxDriver Vision 4K.
Really no installation needed?
No. Plug it into the port and you're done — two minutes, no tools. If you prefer a fixed install at the fuse panel, there's also the hardwire kit.
How do I see the parking footage?
In the app, like any other recording. On impact, the g-sensor locks the clip automatically — your proof stays saved.